Pioneer PL 540


Pioneer PL 540

Build around 1978-1979, the Pioneer PL 540 is essentially the PL 518 with quartz locking PLL hall motor, so the speed is perfect all the time.

It has a nice warm sound but not at the expense of detail.

Like the PL 518, haves auto return function, the tone arm returns to its arm rest when the album is over.

These old Pioneers are very solid units. And sought these days.

There really is nothing made today that is as solid as these old turntables and they still look great even after 35 years.

Like the 518, the 540 rubber on the feet of the turntable is known to break down over time. This one as not the original feet.

Fitted with a static balance type, S-shaped tonearm, Auto-Return and Quick-Start function, the PL-540's platter begin to rotate when you lift the tone arm and move it toward the outer edge of the platter. When the album is finished the tonearm automatically lifts and returns to the tonearm rest. Very simple.

All controls are grouped on the right-hand side of the platter to make handling easier. Also, on the right is the built-in strobe so you can check on the platter's accurate speed.

If you find one that is nice, you'll be very happy to got it. Honestly, you'll love this reliable turntable.











Specifications

Drive system: direct drive
Motor: quartz PLL hall motor
Platter: 320mm aluminum alloy die-cast
Speeds: 33 and 45rpm
Wow and flutter: less than 0.025% wrms
Signal to noise ratio: more than 73dB
Speed deviation: less than 0.002%
Tonearm: static balance type, s-shaped pipe arm
Effective arm length: 221mm
Overhang: 15.5mm
Cartridge weight range: 4 to 10g
Dimensions: 440 x 145 x 365mm
Weight: 10 kg

Comments

Post a Comment

Popular posts from this blog

Hitachi SR-903

Image
Hitachi SR-903 Well… I like Hitachi, I think they made great stuff, and this, is one excellent receiver. When you ear Hitachi you don't think that this company had created audio stuff that could compete with big names in vintage audio like Sansui, Pioneer, Kenwood or Marantz. You have to check Hitachi receivers, specially the TOTL twin brothers SR 903/904 to understand why. This is the 1977 Hitachi SR-903, the 904 was a small cosmetically update to the 903 and addition of VU meters. VU meters are cool, but I like more the 70s look of the 903 and the aluminum knobs… They are big, well-built, crispy in details, clean and dynamic, well controlled bass, a sound beast. All the parts inside of them where manufactured by Hitachi except the filter caps. Massive transformer and an outstanding number of transistors. This receiver uses the Hitachi Class-G topology, it has a 3 rail which allows additional voltage swings and increase peak power output at certain frequencies, other brands at the...
Read more

Kenwood KD 5070

Image
Kenwood KD 5070 Hard to find model, made by Kenwood, hit the market in 1978 and retailed for about 300,00 USD - 275,00 EUR. This is an awesome turntable, in my opinion one of the most beautiful ones ever made. KD-5070 is a superior table and it was Kenwood top of the line, full automatic and direct drive with the top of the base made in ARCB a composite that looks and feels like marble stone, very nice. The motor is placed in that massive anti-resonance compression base, servo-controlled, 20-pole, 30 slot brushless DC motor, precise with excellent performance low noise, wow and flutter. The turntable can be operated both manually and automatically, the tonearm is high quality with static balance and anti-skate correction. KD-5070 was the fully automatic.version of the Kenwood’s KD-500 manual turntable. Overall, the Kenwood KD-5070 is a very nice turntable. Nice look and excellent performance. If you’re looking for a high performing vintage fully automatic turntable then the Kenwood KD-...
Read more

Pioneer PL 530

Image
  The Pioneer PL-530 is, in my opinion, one of Pioneer's best and most beautiful turntables, great in size, looks and performance. The wood and chrome set is perfect. Built in 1976-77 with great quality, Direct Drive, Automatic, 2 motors, smooth and even rotation. A sample of what top of the line audio engineering of the 70's was all about. Only flaw, the plastic arm base with time breaks at the supports, is the weakness of this machine, but that too can be fixed... Specifications: Type: direct drive Motor: brushless DC servo Hall motor Platter: 330mm aluminium alloy diecast Speeds: 33 and 45rpm Speed control range: +-2% Wow and flutter: 0.03% Rumble: 70dB Tonearm: static-balanced type, s-shaped pipe arm Effective length: 221mm Overhang: 15.5mm Cartridge weight range: 4 to 14.5g Dimensions: 480 x 390 x 170mm Weight: 10kg
Read more